Chinese
English
Company News
IP protection grade test tool application
Basic introduction of IP protection grade test manufacturer:
1. Needle flame test is the use of small flame ignition source program according to IEC60695-11-5, GB/T5169.5-2008, GB4706.1-2005 and other standards
2. The needle flame tester uses a needle burner with a specified size (Φ0.9mm), passes through a specific gas (butane), and ignites the test sample at a 45° angle at regular intervals, depending on whether the test sample is ignited and sustains combustion. Time and burning length are used to assess the fire hazard of small flames caused by fault conditions inside the equipment.
3. The needle flame tester is suitable for the research, production and production of lighting, low-voltage electrical appliances, household appliances, machine tool electrical appliances, motors, power tools, electronic instruments, electrical meters, electrical connectors, accessories and other electrical and electronic equipment and its parts and components. The quality inspection department is also applicable to the industries of edge materials, engineering plastics or other solid combustible materials.
Technical parameters of IP protection grade test tool:
1. Needle burner: inner hole Φ 0.5mm ± 0.1mm, outer diameter ≤Φ 0.9mm, length ≥ 35mm, stainless steel
2. Burner angle: inclined 45° (when testing) or vertical (when adjusting flame height)
3. Burning time: 0-999.9s±0.1s adjustable (generally choose 30s)
4. Holding time: 0-999.9s±0.1s, automatic recording, manual pause
5. Flame height: 12mm ± 1mm (with height measuring device)
6. Burning gas: 95% butane gas (bottled lighter gas can be used)
7. Temperature test range: 0~1000℃
8. Flame temperature requirements: the time to rise from 100℃±2℃ to 700℃±3℃ is within 23.5 seconds ±1 second
9. Thermocouple for temperature measurement: Φ0.5mm imported armored (K type) thermocouple
10. Test background: black background
11. Test process: automatic control of test procedures, independent ventilation
12. Reference standards: IEC60695 -11-5, GB/T5169.5-2008, GB4706.1-2005
13. Studio volume: 0.5 cubic meter, stainless steel case (0.75 cubic meter or 1 cubic meter can be customized according to customer requirements)
14. External dimensions of the equipment: 1000mm wide × 650mm deep × 1300mm high
1. Needle flame test is the use of small flame ignition source program according to IEC60695-11-5, GB/T5169.5-2008, GB4706.1-2005 and other standards
2. The needle flame tester uses a needle burner with a specified size (Φ0.9mm), passes through a specific gas (butane), and ignites the test sample at a 45° angle at regular intervals, depending on whether the test sample is ignited and sustains combustion. Time and burning length are used to assess the fire hazard of small flames caused by fault conditions inside the equipment.
3. The needle flame tester is suitable for the research, production and production of lighting, low-voltage electrical appliances, household appliances, machine tool electrical appliances, motors, power tools, electronic instruments, electrical meters, electrical connectors, accessories and other electrical and electronic equipment and its parts and components. The quality inspection department is also applicable to the industries of edge materials, engineering plastics or other solid combustible materials.
Technical parameters of IP protection grade test tool:
1. Needle burner: inner hole Φ 0.5mm ± 0.1mm, outer diameter ≤Φ 0.9mm, length ≥ 35mm, stainless steel
2. Burner angle: inclined 45° (when testing) or vertical (when adjusting flame height)
3. Burning time: 0-999.9s±0.1s adjustable (generally choose 30s)
4. Holding time: 0-999.9s±0.1s, automatic recording, manual pause
5. Flame height: 12mm ± 1mm (with height measuring device)
6. Burning gas: 95% butane gas (bottled lighter gas can be used)
7. Temperature test range: 0~1000℃
8. Flame temperature requirements: the time to rise from 100℃±2℃ to 700℃±3℃ is within 23.5 seconds ±1 second
9. Thermocouple for temperature measurement: Φ0.5mm imported armored (K type) thermocouple
10. Test background: black background
11. Test process: automatic control of test procedures, independent ventilation
12. Reference standards: IEC60695 -11-5, GB/T5169.5-2008, GB4706.1-2005
13. Studio volume: 0.5 cubic meter, stainless steel case (0.75 cubic meter or 1 cubic meter can be customized according to customer requirements)
14. External dimensions of the equipment: 1000mm wide × 650mm deep × 1300mm high
Advisory
Mobile Site
QQ Advisory
0755-23702756
Follow us